A simple tool for testing the percentage of water in brake fluid essential for regular safety checks on your brakes Green Battery OK No water found. Yellow Less than 1% water No action necessary. Yellow/Yellow 2% Water found Check regularly. Yellow/Yellow/Red 3% Water found Change brake fluid. Yellow/Yellow/Red/Red 4% Water found Brake Fluid should be changed immediately.

• Identify percentage of water in brake fluid.
• Suitable for Dot 3, Dot 4, Dot 5
• Quick and simple tool with battery
• Colour coded LEDs show level of water.
• Not suitable for silicone based Dot 5.1

Brake Service Spanners for a variety of modern vehicles

• 9mm x 11mm Hex
• Double Ended
• Quality tool
• Suitable for Citroen, Ford, Renault, Rover, Vauxhall/Opel and Volvo
• Essential for brake service and maintenance

Ideal for use on brake pipes

• Unique flare nut ratcheting action
• Ideal for use on brake pipes
• Flexi-head for tight areas
• 11mm
• Manufactured from Chrome Vanadium

A set of specialist sockets and bit for use on most Bendix and Girling brakes. Also used on the Smart car. Set includes 14mm/19mm Pentagon Socket and 10mm Pentagon bit all in 1/2"D. Packed in a blow case for storage

• 3 piece.
• 1/2"Drive.
• Set includes 14mm | 19mm Pentagon socket and 10mm Pentagon bit.
• For use on most Bendix and Girling brakes.
• Packaged in a blow case for storage.

This new product utilises a patented design to quickly produce high quality SEA and DIN flares on or off of the vehicle. The tool works on Cupro-Nickel and Steel pipes as well as coated steel piping. Can be used in-situ. The set incorporates the tools to flare 4.75mm, 5mm and 6mm pipes by using the correctly sized die and punches.

• Handles Cupro-Nickel and steel pipes.
• High quality SEA and DIN flares.
• Use in-situ.
• Patented.
• Flares 4.75mm, 5mm and 6mm pipes.

CHECK OUT THE VIDEO: LASER Brake Service Tools

An essential tool for ensuring brake pipes are deburred effectively

• Internal/external deburring tool
• Size range internal 3-12mm external 4-14mm
• Suitable for copper | brass | steel | plastics
• Ideal for brake pipes
• Time saver

Cuts 3-16mm pipe diameter without damage or burred edges.

• 3-16mm diameter.
• Great for confined spaces.
• Small handy design for easy storage.
• Easy to use.
• Cuts without damage or burred edges.

A tool kit for sealing metal brake pipes. This set of three fluid locks, suitable for clamping and sealing metal flared pipes on braking systems, cooling system bypass, fuel pipes, AC pipes, etc.

• Provides an effective seal to metal brake pipes when the braking system has been opened.
• Size range: 4.2mm - 10mm.
• Three anodised aluminium bodies with composite screw.
• Prevents brake fluid loss and contamination of the work area.
• Made in Sheffield.

This product is designed to bend three sizes of pipe including 3mm/4mm/6mm (1/8" | 3/16" | 1/4"). It will allow brake pipes to be bent at 45º or 90º angles. Suitable for use on aluminium, steel or copper tubing. Complete with aluminium body and instructions on packaging.

• A brake pipe bender able to bend three sizes of pipe.
• Sizes of pipe can bend: 3mm | 4mm | 6mm (1/8" | 3/16" | 1/4").
• Will allow brake pipes to be bent at 45º or 90º.
• Suitable for use on aluminium, steel or copper tubing.
• Complete with aluminium body and instructions on packaging.

For use with a cordless drill to clean brake cylinders during service. Stone set available separately Part No 2243.

• 20mm < 70mm
• For boring out brake cylinders
• For use with a standard drill
• Stones set is sold separately (Part No 2244)
• Packaged in a sliding blister