Booster cables 700 amp x 4m

• 35mm2 Booster cable
• Length 4m
• Rating 700 amp (Maximum engine size 4500cc / diesel <3,5 ltr)
• Copper coated aluminium
• Fully insulated clamps

A simple but effective tool that will identify the state of the battery whether hot or cold. Suitable for use on 6 | 12 | 24 volt batteries.

• Dial tester.
• Tests battery charge instantly hot or cold.
• Helps to avoid dead batteries.
• Can be used on 6 | 12 | 24volt batteries.
• Rubber and plastic body.

Constantly monitors the battery condition and sends audible warning when charge is low

• Warns you when the battery voltage is below 12.2 volts
• Bleeps every 10 seconds when the battery is below the required voltage
• Ideal for classic cars and vehicles which are only used occasionally
• Simple to fit
• Draws less than 2mA. Draws less than 80mA when buzzing

The timing light enables the synchronization of the ignition system with the piston movement. An inductive pick-up replaces the necessity to disconnect the spark plug wire to operate the timing light. Timing readout : 0-60° BTDC Features: Timing advance up to 60 crankshaft degrees | Superior performance at all speeds through 8000 rpm | Operates on all 12volt ignition systems | Xenon bulb providing Brilliant Blue/White | 1,000,000 flash capacity | Automotive reverse polarity and overload protection | Inductive pick-up | Double check light indicates incorrect hook-up and faulty flash | Replaceable Xenon flash tube (Part No 77009) | Full instructions included.

• Operates on all 12volt ignition systems
• Xenon bulb providing Brilliant Blue/White
• 1,000,000 flash capacity
• Automotive reverse polarity and overload protection
• Timing advance up to 60 crankshaft degrees

This tool with HT spark tester is designed for use on modern engines where there is no space or limited access to the plug leads. This tool can also be used with an Oscilloscope. Full instructions supplied.

• With HT spark tester.
• Designed for use on modern engines.
• This tool can also be used with an Oscilloscope.
• Great for where access is limited and restricted.
• Full instructions supplied.

This simple device overcomes a common problem when the trim on the modern car disguises the earthing of the vehicle. Complete with probe and crocodile clips this tool can also be used with a test light or multi-meter. Simple to use - Just plug into vehicles 12v output socket and use the probe or crocodile clip as the earth.

• This simple device overcomes a common problem when the trim on the modern car disguised the earthing of the vehicle.
• Complete with probe and crocodile clips this tool can also be used with a test light or multi-meter.
• Simple to use.
• Just plug into vehicles 12v output socket and use the probe or crocodile clip as the earth.

This specially designed tool allows access to spark plugs where they are deep seated or require off-line access. The tool is also designed to grip the spark plug securely allowing the removal with ease.

• A flexible spark plug remover or installer tool
• Designed to allow access to the spark plugs where they are deep seated or require off-line access
• Also designed to grip the spark plug terminal securely allowing ease of removal
• Also suitable fitting spark plugs
• Soft grip handle

This non-contact spark tester will test for the presence of power on spark plugs, coils and distributors. Simply place the grooved end over the spark plug wire with the engine running and the high intensity bulb will flash indicating spark. Pen type pocket clip for handy use. CE certificated and RoHS compliant

• Non-contact spark tester
• Tests presence of power on spark plugs, coils and distributors
• Simply place the grooved end over the spark plug wire with the engine running and the high intensity bulb will flash indicating spark
• Pen type pocket clip for handy use
• CE certified and RoHS compliant

Mini Gas torch with heat shrink tubing kit (162pc)

• Assorted coloured tubing and sizes: 1 x 15mm x 500mm Black Tube, Tubes supplied in Red, Green, Blue, Yellow, White and Clear: 1.5mm x 60pc, 2.5mm x 35pc, 3mm x 25pc, 5mm x 20pc, 6mm x 10pc, 10mm x 10pc
• Heat Shrink Tubing meet ROHS directive. Operating temperature range: -55°C to +125°C,
• Manufactured from G5 general purpose, polyolefin tubing
• Characteristics: shrinkage ratio 2:1, very flexible, highly flame retardant, resistant to common fluids and solvents
• Mini Butane gas torch supplied with full instructions. Capacity 6ml, Operating time 20mins, Approximate temperature <1300°C, GS/TUV certificated

This heavy duty timing light has an on/off trigger, rubber nose protector and replaceable leads. Digital readouts for RPM , Dwell, timing advance and inductive pick-up. Suitable for all types of petrol ignition and any number of cylinders.

• Suitable for 12 volt systems
• Inductive pick up
• Heavy duty timing light
• Rubber nose protector
• Replaceable leads