A treasured tool for the classic motorist

• Tyre service kit
• Contents - tyre depth gauge | tyre pressure gauge | tyre valve tool | four valve caps
• Universal kit
• Handy glove box kit
• Ideal gift for the car owner

For removing and installing valve cores. The tool is set to 4 Inch/Lbs (0.45 Nm) and prevents incorrect torque being applied to TPMS valves with sensors

• For removing and installing valve cores
• Prevents incorrect torque being applied to TPMS valves with sensors
• Tool is set to 4 Inch/lbs (0.45Nm)
• Specialist tool
• Time saver

Space saving wheel brace with flip socket in 17 & 19mm

• Space saving wheel brace
• Telescopic handle for leverage and space saving
• 17mm/19mm flip socket
• Cushioned grip handle

• Aluminium gauge bodies with chemically blackened wheel stud locators.
• Measures wheel geometry by attaching calibrated bubble levels to the wheel studs.
• For accurate results these tools should be used with Model No. GA44 Steering Turntables.
• Supplied in a steel case together with operating instructions.

• Ideal for repairing punctures on tubed and tubeless tyres fitted to agricultural and off road vehicles.
• Can also be used as a temporary/emergency fix on cars and commercial vehicles.
• Repair strips allow tubeless tyres to be repaired without removing the tyre from the wheel.
• Also includes parts and tools for general tyre servicing.
• Not to be used as a permanent repair for road vehicles.

• Ideal for repairing punctures on tubed and tubeless tyres fitted to agricultural and off road vehicles.
• Can also be used as a temporary/emergency fix on cars and commercial vehicles.
• Repair strips allow tubeless tyres to be repaired without removing the tyre from the wheel.
• Also includes parts and tools for general tyre servicing.
• Not to be used as a permanent repair for road vehicles.

• Professional steel framed foot pump with two Ø50 x 120mm steel barrels.
• Features large metal pedal for easy operation and control.
• Easy-to-read dial type pressure gauge.
• Gauge calibrated in psi and bar and ranges from 0-100psi and 0-7bar.
• Fitted with 1020mm flexible pressure hose with locking connector.
• Supplied with accessories for inflating items such as small inflatable boats, air beds and balls etc.

• 12V Mini air compressor with delivery of 25ltr/min.
• Integral storage for supply lead and air output hose.
• Features work light for use in low light areas.
• Light can also be set to flash for emergency use.
• Pressure gauge reads up to 8bar/120psi.
• Suitable for inflating tyres on cars, vans and 4x4's.

Wheel Stud Cleaning Tool Set

Additional Information

• Quick and easy stud cleaning tool
• Supplied with a 1/2"D adaptor
• Plus 6 x brushes 12mm (7/16"), 13mm (1/2"), 14mm (9/16"), 16mm (5/8"), 22mm (7/8"), 28mm (1 1/8")
• Quick change brushes. Use with cordless drill.
• Brushes are considered consumable and available as replacements. Part Nos: 2320 12mm (7/16"), 2321 13mm (1/2"), 2322 14mm (9/16"), 2323 16mm (5/8"), 2325 22mm (7/8") and 2326 28mm (1 1/8") - Packs of 5

Wheel studs should be cleaned of dirt, corrosion and grease before refitting the wheels and wheel nuts — the usual rag or wire brush only does half the job and ends up being as dirty as the studs. There is a better way! This new wheel stud cleaning tool set from Laser Tools offers a quick and easy solution to a very common workshop task.

Can be used by hand, or even better, with a cordless drill using the quick-chuck adaptor provided. Each brush is fitted with hundreds of tiny steel wires that scrub away dirt and corrosion in seconds. A quick whizz in and out leaves a professionally cleaned stud.

Six quick-change brushes are supplied in the set and fit both metric and Imperial studs: 12mm (7/16"), 13mm (1/2"), 14mm (9/16"), 16mm (5/8"), 22mm (7/8"), 28mm (1 1/8") — the larger sizes make this tool set particularly suitable for commercial vehicles. New brushes are available in all sizes in packs of five.

An Inclinometer now essential for the modern motor vehicle where accurate angle measurement is becoming more and more important

Additional Information

• An Inclinometer - a digital angle gauge or digital protractor equipped with a built in magnet.
• Perfect for measuring angles on metal surfaces. It is ideal for use as a digital camber/castor gauge when paired with the Gunson 77137 Trakrite Camber Bar
• Ideal for angle measurement for areas such as: suspension setting of camber and caster, setting bumper mounted radar units used in vehicle collision avoidance and parking assist systems
• Also suitable for Citroen/Peugeot variable valve timing setting and checking angle checks for comparison and setting on any flat surface. Plus level checks on vehicle body alignment equipment during crash repair
• Equivalent to PSA OEM 1376-A

When fitted to the tyre/wheel, Gunson’s Trakrite camber bar (part number 77137) gives a solid metal base that is parallel to the wheel and suspension upright and is the ideal mount for camber gauges. When used in conjunction with the new digital inclinometer from Laser Tools (part number 6657) the combination offers exceptional accuracy (±0.2º).

The Trakrite camber bar is assembled in seconds and full instructions are included. It is easy to adjust and use; the top bracket allows for adjustment to the profile of the tyre, then adjust the wheel spacers to the top and bottom edges of the wheel rim — this now gives a solid metal mounting base.

Equipped with a built-in magnet in the base, the Laser 6657 inclinometer is designed for measuring angles on metal and other surfaces, and is ideal for use as a digital camber/caster gauge. It can also be used for engine setting up (for example on Citroen/Peugeot variable valve timing setting and checking where an OEM special tool would be used).

The inclinometer is easily calibrated, then popped onto the camber bar. The camber angle (negative or positive) can be clearly read from the bright LCD screen. The device is powered by a 1.5V AAA battery, and shuts off automatically after five minutes of no movement.  It is supplied with a useful storage pouch.