SPRAY FILM SET, 2 X 400 ML - Ideal for decorating 4 wheels up to 18 inches
PRODUCT INFORMATION
With our Spray Film set rims or smooth and solvent-resistant accessory parts can be modified quick and easily. There's no need to substitute old or damaged rims. The Spray Film gives a new appearance to them quick and easily - and this saves cash money. Just shake it well and spray it on - they will look in mint condition. And here is the clou: Spray Film can simply be removed again.
very good opacity
high-elastic
easy to handle
easy to remove
ideal for car, hobby, home & garden
our spray can works upside down, too
Top efficiency since the spray can empties itself evenly
The set includes:
2 x 400 ml cans SPRAY FILM
additional fan nozzle for broader and more even coverage when spraying large surfaces
25 cards for masking between the wheel rims and tyres
4 cleaning wipes for degreasing
1 pair of disposable protective gloves
Product tip: Optimal in combination with our Spray Film Sealer for the permanent sealing of Spray Film.
APPLICATION
Remove the wheels, clean the rims and degrease it with the enclosed cleaning wipes.
Place the enclosed cards between the wheel rims and tyres.
Carefully apply the Spray Film, done.
Note: Approx. 30 min. after the last spraying, the Spray Film will be dry enough for you to re-mount your tires.
For further instructions read the application sheet!
APPLICATION VIDEO
FREQUENTLY ASKED
What can I spray with SPRAY FILM?
⇒ All smooth and solvent resistant surfaces can be sprayed with SPRAY FILM.
Does the surface need to be sanded?
⇒ No. Sanding the surface makes the SPRAY FILM unable to remove.
Is SPRAY FILM car wash-proof and would it withstand high pressure washing?
⇒ The SPRAY FILM is suitable for car wash systems without mechanical rim cleaning. Cleaning with a high pressure washer is also possible (minimum distance 50 cm).
Can I change a tire with sprayed rims?
⇒ Yes, but plenty of assembly paste should be used. We recommend the tire mounting first, before spraying the rim.
What can remove spray mist?
⇒ Spray mist can be removed using SPRAY FILM REMOVER (item no. 2109).
How temperature resistant is the SPRAY FILM?
⇒ The SPRAY FILM is temperature resistant up to about 120 °C.
How do I repair small damages to the SPRAY FILM?
⇒ Small damages can simply be sprayed or dabbed away. The SPRAY FILM will bind with the old coat.
HAZARD NOTE
Danger: Extremely flammable aerosol. Pressurised container: May burst if heated. Causes serious eye irritation. May cause drowsiness or dizziness. Harmful to aquatic life with long lasting effects. If medical advice is needed, have product container or label at hand. Keep out of reach of children. Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Do not spray on an open flame or other ignition source. Pressurized container: Do not pierce or burn, even after use. Avoid breathing dust/fume/gas/mist/vapours/spray. Wear protective gloves/protective clothing/eye protection/face protection. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Store locked up. Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F. Dispose of contents/container in accordance with local/regional/national/international regulations. Contains Dependen. May produce an allergic reaction.