Viscosity: medium (eg. like honey)

Protection: ca. 15 years (in closed cavities)

Processing: with conventional compressed air systems to heat the material to approximately 45 ° C or with airless systems

Viscosity: medium (eg. like honey)

Protection: ca. 15 years (in closed cavities)

Processing: with conventional compressed air systems to heat the material to approximately 45 ° C or with airless systems

Viscosity: medium (eg. like honey) Penetration: +++ Protection: ca. 15 years (in closed cavities)

Processing: with conventional compressed air systems to heat the material to approximately 45 ° C or with airless systems

Anti-corrosive coating for long term protection of permanent salt water ballast tanks - preferable for in-service tanks - in all types of vessels, drill water tanks, cofferdams, floating docks, caissons, void spaces and
deck equipment.

One component soft gel, solvent-free, lanolin based coating

Colour: Amber, other colors on special order

· solvent-free for higher safety;
· highly economical as easily applied, saves labor, time, equipment and material costs;
· can be applied with normal high performance airless equipment (> 22 : 1 pump ratio) in one coating process up to 800 μm. Can also be applied by air spraying, roller and by brush;
· has a great affinity for ferrous metals, old rusty steel and old well adhering coatings ;
· outstanding fresh and salt water resistance immediately after application;
· self-healing in case of mechanical scoring or similar damage;
· highly flexible and readily compensating for metal expansion, contraction and flexing;
· non-toxic but should not be used in tanks carrying potable water.

FLUID FILM Liquid AR meets and exceeds the corrosion performance
requirements of the United States Military Specification MIL-C-16173 and
has the US National Stock Number 8030-01-381-7311.

Viscosity: very high+ (eg. hard butter)
Kriechfähigkeit: +
Protection: ca. 30 years (in closed cavities)
Processing: Wire rope lubricator or brush / roller / wool glove
Military Approval: MIL-G-18458B (SH)

Viscosity: very high+ (eg. hard butter)
Kriechfähigkeit: +
Protection: ca. 30 years (in closed cavities)
Processing: Wire rope lubricator or brush / roller / wool glove
Military Approval: MIL-G-18458B (SH)

FLUID FILM WRN-EP (WIRE ROPE DRESSING- Open gear lubricant, extreme pressure)
WRN-EP is an approved conservation product for cables, wire ropes, drums, block sheaves and all other kind of standing and running rigging. Its components include additives against extreme pressure to improve the gliding character of the surface wires and strands. The penetration is so good that it infuses rust, covers the individual wires of the outside strands with a protecting coat, penetrates the internal lubrication of the rope. The conservation stays flexible in the temperature range of - 45°C up to + 96°C.
WRN-EP displaces moisture, can be applied on a solid rust surface. It does not dry out, but the film is extremely resistant against wash-off. FLUID FILM Wire Rope Dressing may be applied using a leather or lambs wool glove. When a considerable length of wire is to be lubricated we recommend the use of the MASTO wire rope lubricator, which allows a continuos application of WRN-EP or WRO-EP, while the rope is in operation, giving a complete internal filling of the rope.
Another method is to form a cone of leather about 60 cm long and 15 cm in diameter at the base. Both base and apex are left open, and the wire rope passed through the apex, which is tightly lashed around the wire with marline for about six inches. FLUID FILM is applied to the wire with a rag; the leather cone is then dragged along the wire (or vice versa), so that the excess is scraped off into the cone, the remainder being well worked into the rope crevice. The amount of material left on the wire can be regulated by adjusting the marlin lashing. Too heavy an application not only wastes material but also can result in throw-off, particularly on running cable.
The product is available in 20 ltr. pails.

FLUID FILM WRN-EP (WIRE ROPE DRESSING- Open gear lubricant, extreme pressure)
WRN-EP is an approved conservation product for cables, wire ropes, drums, block sheaves and all other kind of standing and running rigging. Its components include additives against extreme pressure to improve the gliding character of the surface wires and strands. The penetration is so good that it infuses rust, covers the individual wires of the outside strands with a protecting coat, penetrates the internal lubrication of the rope. The conservation stays flexible in the temperature range of - 45°C up to + 96°C.
WRN-EP displaces moisture, can be applied on a solid rust surface. It does not dry out, but the film is extremely resistant against wash-off. FLUID FILM Wire Rope Dressing may be applied using a leather or lambs wool glove. When a considerable length of wire is to be lubricated we recommend the use of the MASTO wire rope lubricator, which allows a continuos application of WRN-EP or WRO-EP, while the rope is in operation, giving a complete internal filling of the rope.
Another method is to form a cone of leather about 60 cm long and 15 cm in diameter at the base. Both base and apex are left open, and the wire rope passed through the apex, which is tightly lashed around the wire with marline for about six inches. FLUID FILM is applied to the wire with a rag; the leather cone is then dragged along the wire (or vice versa), so that the excess is scraped off into the cone, the remainder being well worked into the rope crevice. The amount of material left on the wire can be regulated by adjusting the marlin lashing. Too heavy an application not only wastes material but also can result in throw-off, particularly on running cable.
The product is available in 20 ltr. pails.

Viscosity: low-medium (eg. like ketchup)
Kriechfähigkeit: + + + +
Protection: ca. 6 years (in closed cavities)
Processing: with conventional compressed air systems to heat the material to about 25 ° C or with airless systems