Hodt MULTI FILM - PRIMER & topcoat - solvent-free
Viscosity:
+
Term of protection:
+ + + + + + +
Processing
With a brush, roller , dipping or spraying a dry film thickness of at least 100 microns should be achieved . Hodt MULTIFILM can , if necessary , be diluted with water . After dilution but have several layers are applied to achieve the desired thickness . It is dust-dry after about 2 hours and 24 hours to recoat depending on temperature and humidity .
Type of material
Hodt MULTIFILM is an aqueous « hybrid » system that includes both a physically dry , aqueous dispersion and a water-soluble , oxidatively curable binder system
Application areas
Protection of metallic surfaces as a primer and topcoat as additional protection of painted surfaces against environmental influences and mechanical damage clear corrosion protection for obtaining a patina
Packaging
Canister à 1 ltr
Canister à 5 ltr
Bucket à 20 ltr
Product Information
Constantly meet in search of innovations to our customers' needs as far as corrosion control , we present our newcomer . On the recurring question of a paintable rust protection we have now found the answer :
HODT MULTI FILM, the newest product in the antirust series of Hodt , is a true MULTI TASKER . Not only that, it can be used as rust , it can even be painted as a primer with most common paints . Thus it is an indispensable aid in every workshop .
But also in other areas such as the industry or the machine can Hodt MULTIFILM points . Whether steel, galvanized steel , aluminum , plastic or plaster to existing coatings , Hodt MULTIFILM suitable for many substrates .
The transparent antirust is even used for the preservation and protection of original patina . The secret of this environmentally friendly all-rounder is its novel aqueous " hybrid " system . These features result in a hard , wear-resistant , elastic coating with excellent resistance to corrosion .
In the user-friendliness Hodt MULTIFILM takes under the rustproofing products a leading position : it does not contain solvents , does not have to be heated and can even be diluted with water .
Substrate processing
HODT MULTI FILM apply only on fat-free , cleaned surfaces . It can be painted on tight rust . The detailed procedure can be found in our technical data sheet .
Technical characteristics
Viscosity (mPa.s measured with Brookfield at 20 °C): 80
Flash point ( in liquid form ) : not applicable
Solids content ( wt.%) : 34-36
Insulation resistance ( in Ω ) : 5 x 10¹¹
Temperature range (° C ) : -40 - +120 ( +150 ° - current)
Tack ( u at 20 ° C 25 microns thickness . ) : 2 hours
Curing time (at 20 ° C in hours ): 24
Solvent resistance: good
Moisture resistance: good
Thinner: Water
Color: black
Storage
Protect from frost.
At temperatures up to 25 ° C , the original packaged goods is at least one year shelf life .