This product helps to test Diesel Injectors for opening pressure, leakage, spray patterns, atomization, chatter characteristics and leakage between injector needle and injector body. Complete with transparent plastic tank and filter and two connecting pipes M12 and M14. Calibrated hand pump with 3 1/2" dial reading 0-600 bar (0-8700lbs/sq inch).

• Helps to test Diesel Injectors for opening pressure and leakage spray pattern.
• Plastic transparent tank.
• Two connecting pipes M12 & M14.
• Clear display.
• Measures in lbs/sq inch.

Ratchet crows foot oil filter wrench

• 27mm x 1/2"D with switchable Bi-hex ratchet head
• Application: Ford Durotorq TDCI (DW12C) diesel engines: S Max/Mondeo/Galaxy
• Euro 6 compliant engines from 2010 onwards
• Chrome plated Chrome Vanadium
• OEM 303-1579

suitable for the following engines

Handbook Download

Pre Chamber removal adaptor and slide hammer kit for Mercedes Benz

• Supplied with a double ended adaptor incorporating M22x1mm and M22x1.5mm threads in one adaptor
• Used to remove the pre-chamber from the cylinder head on early indirect injection Mercedes diesel engines
• Used after the pre-chamber socket (Laser 5472) has been removed
• Engines covered include OM 601, 602.91/93/94, 603.91/93/96/97, 604, 605, 606, 615, 616, 617.91/93/95
• Always grease threaded bar

A handy set of brushes ideal for engine rebuilds or for removing contaminated oil or grit from rocker shaft and crank oil feeds etc. Brushes are 300mm long and include 4mm, 6mm, 11mm and 16mm

• A 4 piece Engine Cleaning Brush Set
• Brushes are 300mm long
• Sizes include 4mm | 6mm | 11mm | 16mm
• Ideal for engine rebuilds
• Or for removing contaminated oil or grit from rocker shaft and crank oil feeds etc..

This flexible honing brush set with 120 grit and 8/12/20mm shafts are complete with a 1/4" quick change shank for use in a cordless drill. Suitable for use in a variety of applications including surface finishing and deburring on engine parts, including cylinder heads, tubes etc.

• 3 Piece
• 120 Grit
• Sizes include 8,12 & 20mm Shafts
• 1/4" quick change shank for use in a cordless drill
• Suitable for use in a variety of applications incl

This specially designed tool allows access to spark plugs where they are deep seated or require off-line access. The tool is also designed to grip the spark plug securely allowing the removal with ease.

• A flexible spark plug remover or installer tool
• Designed to allow access to the spark plugs where they are deep seated or require off-line access
• Also designed to grip the spark plug terminal securely allowing ease of removal
• Also suitable fitting spark plugs
• Soft grip handle

This kit allows the safe removal of the crankshaft pulley (vibration damper) from all W11 Mini engines.
It has been specially designed with slotted mounting holes to allow it to fit both types of W11 pulley.
The kit also includes the thrust pin that must be fitted into the crankshaft before the puller is fitted. The thrust pin prevents the puller from damaging the nose of the crankshaft.
• Mini W11 engine pulley puller as found in R50, R52, R53 chassis.
• Puller is equivalent to OEM 11 8 450 and 11 8 441 adaptor.
• Thrust pin equivalent to OEM 11 8 270, to protect the crankshaft.
• Suitable for all 1.6 Mini Cooper, Cooper S W11 engines.

This oil gauge and dipstick is designed for measuring the oil levels on different Audi engines fitted with electronic oil level systems. The tool checks the oil levels on Audi 2.0 TFSI, 3.2 FSI, 3.0 Supercharged, 4.3 FSI and 2.0 TDI CR.

• Oil gauge and dipstick.
• Specifically for Audi engines fitted with electronic oil level systems.
• The tool checks the oil levels on Audi 2.0 TFSI, 3.2 FSI, 3.0 Supercharged, 4.3 FSI and 2.0 TDI CR.
• OEM T40178.
• Can also be used to assist the calibration of the driver’s instrument panel.

These tools expand into the good threads at the base of the spark plug hole and cleans and restores the threads which are damaged and are usually at the top as they are reversed out.

• Internal thread restorers 260mm long.
• Sizes 12mm and 14mm.
• Consumable items.
• Ideal for deep seated spark plugs.
• Time saver.

This kit converts the thread on Colortune and Hi Gauge Compression Tester to fit most popular sizes of spark plugs fitted to most modern and classic cars, motorcycles, garden machinery and boats. Contents 1 x Thread Adaptor (10mm,12mm,14mm or18mm), 1 x Gas Seal Washer 1 x Hex Key (with 18mm adaptor only)

• Compression tester adaptor
• 14mm Thread size
• Tapered seat (taper slim)
• A compression test adaptor for specific automotive
• Converts the thread on Colortune and Hi Gauge Comp